Ashveda Industries Limited is a leading flooring and construction chemicals company
Wall Putty in Nigeria with Mould Release & Curing Compounds
Shutter release and curing compounds are used during concrete casting and curing processes. The range includes water-based and solvent-free mould release agents, along with water-based and acrylic copolymer–based curing compounds for concrete and plaster surfaces. These products are applied across precast, prestressed, RCC works, and other concrete surfaces.
Wall putty in Nigeria is used for surface preparation and finishing of internal and external walls. The range includes acrylic water-based wall putty suitable for application on rendered walls, hollow blocks, precast walls, and concrete ceilings.
10x SHUTTER RELEASE WB
Water based Mould Releasing Solution
Features & Benefits
Non-Corrosive Product safe for steel moulds Water based release agent it is very cheaper than petroleum and solvent based products, it gives a good finishing and colour to the end product,
Applicable For
it is used to give quick, easy and clear stripping of moulds and also ensures good quality and stain helps remove the RCC pipes from the mouid without any damage.
Dosage / Coverage
30-70 m2/li
Packing
20 Ltr. 200 Ltr
10x CONCURE WB
Water based Concrete curing compound
Features & Benefits
Water based product. No objectionable, Forms an efficient barrier of moisture for optimum curing of concrete. Eliminates the requirement of water in traditional concrete curing method Keeps concrete cool by reflecting light and heat and minimises the chance of surface cracking,
Applicable For
All concrete and plaster surfaces which requires curing Suitable for interior and exterior application, Towers,Bridge decks, Highways, Canals, Ramps and Walls
Dosage / Coverage
3-5 mm/kg
Packing
20 Kg, 200 Kg
10x SHUTTER RELEASE WC
Solvent free, ready to use, Chemical release agent suitable for mould and shutter faces.
Features & Benefits
Rappid drying, fast placement Ensures fast stripping of Forms Stain free, Less voids. Alkali resistant.
Applicable For
It is suitable for shutter faces made from wood, steel. aluminium. Applicable in prestressed, precast, and pipe plants.
Dosage / Coverage
30-70 m2/lit
Packing
20 Ltr. 200 Ltr
10x CONCURE WC
Water dispersed, acrylic copolymer based concrete curing compound
Features & Benefits
Reduces incidence of plastic cracking, Reduces shrinkage, Reduces surface dusting
Applicable For
Suitable where subsequent surface treatmen with acrylic paints and polymer modified mortar or plaster etc. are required.
Dosage / Coverage
5 to 6.5 m² per liter
Packing
20 Ltr. 200 Ltr
Wall Treatment
10x WALLFINISH 1000
Acrylic water based Wall putty for internal and external use
Features & Benefits
Strong grip. Glossy finish Water resistance, Scratch proof Smooth & consistent, Quick drying, Lesser porosity.
Applicable For
Applied on rendered walls, On hollow blocks & precast walls. Used on concrete ceilings.
Dosage / Coverage
35-40 m² per 20 kg. bag for double coat
Packing
20 Kg.
Frequently Asked Questions
Admixtures are materials added to concrete or mortar during mixing to modify properties such as workability, setting time, strength development, and water resistance. They help improve concrete performance based on grade, application type, and site conditions.
Integral waterproofing admixtures reduce permeability throughout the concrete mix by limiting capillary absorption. Crystalline waterproofing admixtures penetrate concrete and react within capillaries to block water paths, resisting both positive and negative water pressure in structures like basements and water tanks.
New concrete can be bonded to existing concrete using suitable bonding agents applied to a properly prepared surface. These bonding agents improve adhesion between old and new concrete, ensuring a durable and long-lasting repair or extension.
For heavy machinery and areas subjected to dynamic or vibratory loads, high-strength, non-shrink grouts are commonly used. These grouts provide strong load transfer, dimensional stability, and long-term performance under continuous stress.
Yes. Tile-on-tile installation is possible using specially formulated tile adhesives designed for strong bonding over existing tiles. Proper surface cleaning and preparation are essential to ensure adhesion and prevent tile failure.
Running water leaks in cracks, joints, and form tie holes can be stopped using rapid-setting water-plugging compounds. These materials react quickly on contact with water and are used for emergency leak control in basements, tanks, and underground structures.